A panoply of (sometimes) lovingly handmade crud.

Tag Archives: viscose

I’m so excited to start a new sewing project. I haven’t had any time to sew for ages. I bought this fabric at least 18 months ago. I was inspired when I saw a similar fabric on Instagram, made up into a very cute top. This is my favourite leaf shape- I have three pieces of jewellery and a shirt featuring it. When I saw this in the Sew Over It fabric e-mail, it caught my eye straightaway. I won a Sew Over It voucher wearing my monstera blouse, so why not use it to make another?

The prizewinning picture

This is the fabric. I bought 1.5m, which cost just over the £25 my prize voucher covered.

This project initially got hijacked by another sleeveless top project. This provides yet more evidence that I need to start projects very soon after buying the materials, otherwise I risk losing motivation.

I was a little torn between making another version with sleeves or a breezy sleeveless top for summer. I decided to opt for sleeveless. I didn’t wear short-sleeved tops to work for a long time because I was self-conscious about my tattoo, but I’m getting over that. I think I will add buttons to the front opening- I love an excuse to find tiny cute buttons- but omit the patch pockets. I think they will interrupt the beautiful large-scale print. Also pockets like that are useless. I’m very practical when it comes to clothing, so any details like frills, ruffles and decorative pockets aren’t for me.

When I first resumed sewing, I was all about the FBAs (full bust adjustments). I made my first adjustment on one of the very first dresses I made- a Tilly and the Buttons Bettine. I was excited by the prospect of properly fitting tops. However, more recently I have felt… almost resentful of having to make them. It’s hard to say why. For some projects, it doesn’t matter, but it is pretty important in this top. The olive version (size 12) I made is a little gapey in the shoulder region, while the white version (linked above, size 10) is too tight across the chest. It is very clear that a FBA is needed and so I decided to bite the bullet.

I traced off the front pattern piece and followed this tutorial for a full bust adjustment. I made a 1″ FBA, which will give me 2″ of extra wiggle room.

I followed this tip from Karen at Did You Make That and split the bust dart since it’s over 8cm. I kind of just eyeballed the split so I hope it’s going to look nice.

One slightly odd note is that when I marked my bust apex, it was higher than the original point in the pattern- you might be able to make out two small pink ‘x’s in the image above. However, a larger bosom is more subject to the effects of gravity, so normally the bust point would be lower. This theory is borne out in the fact that the darts on my two previous TC1617s are too high.

Even though I tried remeasuring a few times, I couldn’t figure out what I was doing wrong and just moved the bust point down by an inch or two. Again it was an eyeball job.

I’m hoping to get the fabric cut out before I go on holiday. I have to decide whether to try and sort a workaround for my lack of table at home (the only thing I think would work is sewing on the bench in the garden, but I don’t have a long enough extension cord) or avail myself of the sewing café at Sew Over It one Friday afternoon. I’m currently leaning towards the latter, though I am rapidly running out of free Fridays.

I really hope this blouse turns out nicely, since I would like to make another one from this beautiful fabric I couldn’t resist buying a couple of weeks ago.

I have now unsubscribed from the Fabric Godmother mailing list. I am too weak.

Costs

Fabric: £3.50

Pattern: Third use, original cost £3.22

Notions: Around £5

Total: Under £10!

Advertisements

Overall, I’m very happy with how my plain version of the Colette Macaron dress turned out.

It felt good to be able to use my skills to make the changes I wanted to this dress. I did look for some guidance on line, but when I couldn’t find anything about altering the pattern, I decided to go my own way. I was aware that my sewing improved a lot over the past couple of years, but I don’t consider myself an especially advanced sewist. I had a lot of help with my most complex projects, including the only thing I have ever lined properly (my coat). However, I definitely have picked up tips and tricks from Julie that helped me.

That being said, the guts of the dress turned out to be a bit of a mess. Even though it felt good to follow my own instincts when it came to the lining, this remains something I am not experienced at doing. Next time I want to line a garment, I will follow a proper tutorial.

I kind of went halfway in between lining and underlining the dress, when I probably should have just stuck with one method. Another problem was the fiasco with the skirt (described in my last post, which has a lot more details about what I did). I had already used a French seam (definitely incorrect in this situation) on the side with the zip. I decided to slightly fudge the redo of the seam, which doesn’t affect the outside but looks like a dog’s dinner inside.

On the plus side, I have been reminded that a lining (however inexpertly installed) makes a garment feel so much more luxurious. This dress feels much more ‘proper’ than any of the ones I have made before.

I haven’t covered up the waistband seams yet. At some point I plan to slip-stitch some ribbon over the whole waistband area. But I decided to leave it for now. If the lining overall had been more successful, I would care more about how the inside looks. Life just feels too short at the moment. I’m not one of those people (yet) who needs the wrong side of their makes to be as beautiful as the right side.

While I was making this dress, it occurred to me that sewing is a form of 3D puzzle. I am generally a bit bemused by adults doing things like Lego, but dressmaking really does use a similar skillset- lots of spatial problem-solving. Spatial awareness is definitely a weakness of mine, though it’s improved in leaps and bounds during my adulthood. It feels pretty good to exercise those muscles.

Coming in at under £35, this dress is one of my cheaper makes. The viscose was quite inexpensive even though it seems like nice quality to me. I suppose it is quite thin. I don’t understand fabric costings at all! I feel like this is the kind of dress that would sell for £60-70 in Oliver Bonas.


I bought this fabric just over a year ago, planning to make a third Day Dress (previous version 1, 2). I saw someone else using it at my disastrous silk cami workshop (Sew Over It were stocking it at the time) and fell in love. Although I like the Day Dress, my pink Macaron is probably the most flattering dress I have for day wear. I decided to have a go at making a version without the contrast bodice, which no one else seems to have previously attempted. I certainly could not find any blog posts about doing this even after extensive searching.

This post contains detailed notes about how I created a solid Macaron by combining the yoke and bodice pattern pieces. I will also describe how I lined this dress- I don’t think I did the best job, it’s more a case of notes for future learning.

I overlapped the bodice and yoke pattern pieces by 3cm and traced. On the front I also increased one of the darts by 5mm since some length seems to be taken out at the seam between the pieces. I probably should have done this on the waist dart but I took it out of the side dart- I don’t imagine this will make much difference. I just did the back straight and did not alter the shaping- I’m fairly confident this will work for my figure.

I also decided to make my life difficult by lining the dress. The neckline facing on my first Macaron is a travesty (partly my error, partly the pattern). At present I have only planned lining the bodice. I’ll see how I feel when I get to the skirt.

I easily got this dress out of 2m of fabric by book folding it. I nearly always do this and it saves loads of material. Pattern companies tend to massively overestimate the fabric requirements, as well as not having cutting diagrams that are as efficient as possible. It’s really wasteful and annoying. Bear mind that I also cut out two bodices.

I cut a size 10 with adjustments as described previously. I interfaced the waistband for extra stability. Since I had plenty of fabric, I decided to self-line the bodice so I don’t have to worry if the lining ever peeks out at the neck seam. I pinned and machine basted the darts as pleats in the lining pieces, trying to have the excess fabric fall in the opposite direction to the darts in the shell.

I made up the bodice as directed, following the same instructions for the lining. I joined the two pieces RS together at the neck. Note: do not finish the neckline edges before stitching.

I machined the bottom hem of the lining to the seam allowance between the bodice and waistband pieces at the front and back separately.

This is how the bodice looked just before I attached the sleeves. I’m very happy that I decided to line the bodice since the fabric is so delicate. It makes the dress feel much more classy and professional.

I attached the sleeves as in the pattern, to both layers of bodice and lining. I then finished the seam as one piece. I haven’t yet removed my hand-basting because I think it looks really cute.

I decided it would be silly to line the bodice but not the skirt. I cut out additional skirt pieces using the leftover lining from my coat. I shortened the pieces by about 3 inches and incorporated the selvedges at the bottom to save hemming (lazy sewing for the win!) I made up the skirt lining as directed, ironing the pleats in the opposite direction to those in the shell.

I had planned to attach the skirt and lining within the waistband seam allowance before I sewed the skirt to the bodice. However I wasn’t sure about having additional weight of the lining pulling down on the waistband piece. The fabric really is very delicate. Thank goodness I decided to interface it!

In the end I couldn’t think of another solution. Weirdly I had an issue with having a lot of extra length in my bodice compared to the skirt, but only at the front. I was able to ease it, but it took three attempts. When I tried the dress on, it looked weird. I tested the pockets and… they were on the back of the dress. I had seamed the wrong side of the skirt 🤦🏽‍♀️

My inability to tell left from right bites me again. I spent ages undoing the incorrect stitching and sewing the skirt together on the correct side. I then re-did the waist seam and it went together much more smoothly.

I tried on the dress and I’m really happy with the fit. I love the way this dress makes my figure look.

The last step was to insert the zip. That part was relatively pain-free. I hand-tacked the dress to the zip before stitching to ensure the waistband seams would line up- this definitely helped. I probably should have used a 1cm seam allowance rather than 1.5cm because the dress is a teeny bit tight at the waist. My makes normally give slightly with wear, so I don’t think it’s worth the bother of reinstalling. Now just the hem and a bit of finishing and this dress will be ready!

Cost breakdown

Fabric: 2m of viscose costing £18 (I paid £2.95 p&p for this and the fabric for my cloud tee). I also used less than a metre of viscose lining (a scrap so I will not cost this)

Pattern: £18 (second use)

Notions: All bought ages ago so no idea. Let’s provisionally say £5

Total: About £33


I’m so pleased with how my Threadcount 1617 shirt turned out! When I look at it, I can hardly believe I was capable of making it myself. This project is a surprise win. I wouldn’t have chosen this fabric if it hadn’t been on sale, but it’s fun to experiment with a colour and pattern slightly outside my comfort zone.

There are a lot of lovely finishing details in this shirt. Plenty of slip-stitching of facings to hide seams. Overall I am very happy with the finish even though I made quite a few mistakes. I tried not to be too perfectionistic about tiny details, but rather treat the process as a learning experience for my next make.

I have mostly used indie patterns up until now. There is a lot of hand-holding and the techniques have been quite simple. It was nice to take on a more complex pattern. The sparse instructions gave me a sense of being trusted to know how to interpret them. Making the collar was the part I found the most challenging. You have to press the curved seam allowance, which is incredibly fiddly. I then managed to sew the collar on backwards!

I was glad to have done the Ultimate Shirt class at Sew Over It because I was a bit more familiar with the couture techniques that were just casually mentioned in the instructions. I had to think quite hard at times to figure out what I was supposed to be doing. I found the process very engaging and twice looked at the clock to realise I had been sewing for several hours without noticing the passage of time.

I harvested these buttons from a RTW shirt that was worn out. Something so nice about making clothes is personalising to your unique body. The old shirt had such narrow cuffs that it was impossible for me to get them over my hands with the buttons done up. This made me feel like a huge-handed freak. I tested that the cuffs fit over my hands comfortably before placing the buttonholes and buttons.

I LOVE the button tab detail. So worth the extra effort.

I can’t wait to make my summery version of this shirt, though I think that will have to wait until after I have moved house. Something I will definitely need to consider is how to finish the seams. Even though I have become quite a fan of French seams , they weren’t suitable in many places. I didn’t realise until too late due to my bad habit of not reading through all of the instructions before starting out. It will probably make most sense to keep it simple and either use an overlocker or overcasting foot.

I think I will stick with the Size 12 next time. The fit is decent in the shoulders and I like the roominess for a breezy summer shirt. It’s also SO NICE to have a blouse that is the correct length and doesn’t pool around my hips.

Firsts

  • making a two-piece sleeve. The fit is great!
  • making a curved hem that looks ok. I found this tutorial helpful. The secret seems to be just pressing it to death.

Changes not mentioned in last post

  • shortened by 6cm
  • added four press studs to fasten

Pattern: Threadcount 1617 View C size 12

Fabric: 169cm viscose remnant (140cm wide)

I think 1.5m of fabric would be sufficient for this size and view

Costs

Fabric: £10.89 (including delivery)

Pattern: £3.22

Notions: Around £5

Total: About £19


I’ve been working on sewing my first version of the Threadcount 1617 shirt. I bought the olive fabric on a whim from a Cotton Reel Studio remnant sale at least a year ago, knowing it would probably be used for a wearable toile. Once I got it, I had the idea that it would make a cute garment with a mandarin collar. When I spotted someone’s version of Threadcount 1617 on Insta, I saved it and then promptly forgot the whole thing for several months.

While going through my saved images recently, I remembered the shirt. A cursory google revealed that someone was selling it on eBay and it arrived as a birthday present to myself.

I have a gap in my wardrobe for smart-casual tops. I basically have striped long-sleeved t-shirts, denim shirts and fancy collared blouses. Nothing that would look smart-ish with jeans for work. As my body and tastes change with time, I increasingly like the way I look in tops that fit in the shoulders and bust but are relaxed around the midsection.

I love the fit of this shirt. It would have looked frumpy on me as a chubby twenty-something (which I still am in my head) but it looks chic on my more mature, slimmer frame.

My space print top measures around 41″ in the bust. I decided to cut a size 12 in the hope that any extra ease would prevent the buttons from gaping. Since this is a relaxed fit shirt in a drapey fabric, I don’t think a little extra room will matter too much.

This pattern has a really good layout for cutting (a lot less wasteful than other patterns I have used), which was a little bit of a concern since my fabric was 140cm wide rather than 150cm. However, I had plenty of fabric. The pattern has LOADS of markings to transfer, which I found extremely tiresome. However, it is worth doing.

There were also quite a few pieces to cut out of interfacing. As you can probably tell, I initially intended to trace this pattern but there were way too many fiddly pieces so I gave up.

The construction of the shirt is a little more tricky than any other written patterns I have attempted independently. Making the front opening was a head-scratcher for me! I think it looks okay overall, even though the bottom edge is a bit wonky and I think it is likely that holes will form in the corners.

Notes:

  • Carefully check tension for sewing a single layer of drapey fabric (reinforcing the neckline)
  • Be very careful when reinforcing- mark before doing. This will have a significant effect on the final look
  • Use fray check in corners
  • Because the fabric frays so much, I used French seams on the side and sleeve seams. DO NOT use a French seam on the first sleeve seam above the opening. Also be mindful of this issue on the bottom hem
  • My machine seems to handle viscose better with a regular foot than a walking foot
  • If making view C again, shorten by 4″

Overall I am pleased that I decided to make a wearable toile of this top. It has a lot of details I was doing for the first time. It would have been stressful to make using fabric I cared about more. I already have the supplies to make a second version. I quite enjoyed the trickier construction and am surprised to find myself looking forward to doing it all again.

Pattern: Threadcount 1617 View C size 12

Fabric: 169cm viscose remnant (140cm wide)

Costs

Fabric: £10.89 (including delivery)

Pattern: £3.22

Notions: Around £5

Total: About £19


I just about finished sewing my dress in time for the wedding. If I ever mention starting a garment with less than a week before the event I am due to wear it, someone please slap me. This dress jumps straight to the top of the list of most complex garments I have ever made. The difficulty was due to a combination of altering the pattern and working with tricky and costly fabrics. However, as has fortunately been the case often in my craft life, she who dares wins!

My initials are MEAD, so I was kind of tickled by this sign.

This was my first time lining a dress. I underlined the bodice and lined the skirt with lovely navy viscose. I stupidly cut the skirt lining too short, so I had to fudge lengthening it with some ribbon. I didn’t make the best choice in selecting velvet ribbon- though pretty, it’s much stiffer than the fluid viscose- but actually it looks okay under the voile.

For the first time, I added snaps to the dress to stop my bra straps peeking out. It worked pretty well! Here you can also see the guts of the dress- probably the best wrong side finish I’ve ever achieved.

This was such a fun summer wedding. So much so that I forgot to take any pictures except the few next to the sign on the way! Thankfully Glory posted this candid picture that shows the back of the dress.

I love how the scooped back turned out. I will most likely incorporate this change into any further Southports.

Further details about the alterations I made to the pattern can be found here.

Here are my two lovely Southports.


I really struggled when it came to what I wanted to wear to this wedding. I have a couple of beautiful silk dresses that I have worn to other friends’ weddings, but this is a younger wedding and I wanted to wear something a bit more fun. I was also keen to make something. I had planned to make my Liberty Macaron, but I went off that idea quite quickly after finishing the toile. Even though most of my clothes are quite quirky, when it comes to lines, I like classic simplicity. Somehow a sweetheart neckline didn’t feel right.

I spotted some beautiful viscose on Fabric Godmother, featuring a cute cocktail print, and thought it would make a great maxi Southport. I vacillated about whether and how much to get, and in the end it sold out before I could buy any. I was sad about that, but the fabric was cream and I was definitely uncertain about wearing a full-length white dress to someone else’s wedding. After some more looking around, I came across this rocket-print fabric that I had spotted on Fabric Godmother before. Soon, two metres were winging their way to me.

I am slightly worried that I am insane. My previous attempt at working with silk was an absolute disaster. I have also never worked with a sheer fabric. I have less than two weeks to learn a lot of new skills, and any mistakes will mean ruining the costly fabric.

I’m also worried the dress won’t turn out the way it looks in my head. The fabric is darkest navy and I’m just not sure the whole thing will work.

Planned changes

  • Eliminate button band again
  • Cut back bodice neckline to match front bodice neckline (perhaps even an inch deeper) to give a dressier effect
  • Fully line bodice. I still haven’t fully decided whether I will be underlining or lining. At the moment, I’m thinking underlining because I don’t want the seams to be visible through the sheer fabric. But then how will I finish the neckline and armholes? Will the bias binding finish work through two layers? This is so complicated! I need to keep reading up on this. Current plan is to underline and use bias binding to finish.
  • Add modesty lining to the upper part of the skirt
  • Eliminate pockets. These are two words I thought I would never type, but I don’t think they are a good idea in such a light fabric. Also, because the dress is sheer, you would be able to see the contents. Also also, the Southport directions don’t seem indicate to finish the side seams, and I need French seams to finish the silk voile. Update: I just didn’t see the instruction to finish the side seams when I made my my previous Southport. Comment about French seams still stands.
  • Remove 2cm length in a curve on the back bodice. Add scant 1cm length in a curve on the front bodice. Really, I probably need to do an FBA, but that’s for another time.

So far the cutting has gone okay. 2m was only just enough to squeak out this dress. If you are using a directional print or making a size bigger than about a 4, you will definitely need more. I also cut the selvedges as part of the pieces for the skirt front as I had practiced a seam finish that incorporates them.

The underlining was pretty fiddly. The silk is actually okay to work with as it is textured. The viscose is more tricky, being drapey. It just takes lots of time to smooth etc. I hand-basted the front and back pieces.


I found the bias binding finish even more annoying the second time! It’s just really fiddly. Not helped by using satin binding, but I thought that would be better suited to my fabric. Even more infuriatingly, the neckline doesn’t really sit flat. Pressing helped a bit. Maybe it’s because I didn’t clip the seam allowances.

Fortunately I took a break after writing the above paragraph. Things seemed less negative when I came back to the bodice, and the bias binding one the armholes went much better.

I’ve got to say I’ve enjoyed learning and trying out some tailoring techniques on this dress. I’m cautiously optimistic about the result.

Notes:

  • Adding length to the bodice in a curve also adds width to the pattern piece! I nearly got in trouble because the waist sections of my bodice and skirt weren’t the same length when I came to join them

Fabric: 2m silk voile, 1.5m viscose for lining

Pattern: Southport dress (maxi version)