A panoply of (sometimes) lovingly handmade crud.

Tag Archives: sewing bettine

I finished sewing my second Bettine dress! I’m so pleased with this project, especially considering that this is my first time working with jersey.


I detailed the changes I made to the pattern here. I’m very happy with the alterations I made from my first go at this dress. I think the Bettine works really well in a knit. I’m really pleased with the fabric, too. The jersey feels heavy and of great quality, but because it’s cotton, it’s also breathable.

When I tried the top and skirt on before constructing the waistband, I realised that the tulip skirt looked a bit silly on me in this heavy jersey, so I reduced the curve.

I love the way the neckband gives the dress a more t-shirty look. I would agree with others that a jersey Bettine is basically secret pyjamas.

Somehow this dress seems a little on the short side. My raindrop Bettine seems around my standard dress length, whereas this one is only just long enough (for my personal taste) to wear to work without tights. I made the hemline exactly as instructed so may lengthen by a centimetre or two if making in jersey again. I am only 5″4, though I do have long legs.


Slightly random note, but this project uses a lot of thread. I bought a new spool of turquoise polyester thread and had to get a second one to topstitch the hem. While I did a fair bit of unpicking, I didn’t finish any of the edges (apparently you don’t need to with jersey) so I was surprised that I got through so much thread.

I’ve always been very apprehensive about working with a knit fabric, so I’m relieved that I was able to do it. I did really take my time with this project, which helped. I’ll see how this dress wears, but I can definitely see more jersey Bettines in my future.

Pattern: Bettine by Tilly and the Buttons

Fabric: 2m cotton jersey from Sew Over It

Advertisements

I finished sewing my Bettine dress!

I made a few alterations to the pattern, including a full bust adjustment. I included a bit more information about the changes in my previous post.

Overall, I think this is a great pattern. The only minor comments I would have is that my neckline gapes a little, and I find there is a bit too much ‘blousiness’ in the bodice- I will shorten it in future.

Although I’d read that double gauze can be translucent, I thought I’d be alright because the double gauze I bought from the same supplier before was solid. All I can say is, white makes fools of us all!

I think the biggest issue is likely to be that the fabric creases quite badly. I’m just going to have to live with that as I seldom iron when I’m not sewing!

Pattern: Bettine by Tilly and the Buttons

Fabric: 3m double gauze, 108cm wide


After the relative success of my raindrop-print Bettine, I was excited to cut another. I picked up this remnant of striped jersey from Sew Over It a few weeks ago. I thought £7.50 was very reasonable for two metres, and when I was looking for more information online, I discovered that it’s still available for £13/m. I love a bargain. I’ve never worked with a knit fabric before, and getting this fabric so cheaply helped me to push myself.

I made a few further changes to the pattern

  • Reduced neckline by 1cm on each side to prevent gaping (tutorial here)
  • Reduced length of bodice by one inch
  • Curved front skirt waistline to match back
  • Removed 4cm (2cm each side) from neckband. In future,  remove 5 or 6cm
  • Stabilised areas with wonder tape before twin needle stitching to reduce tunnelling
  • Finished pocket edgings with the same technique as the neckline. Used 23cm strip of fabric
  • Single layer pockets
  • Reduced curve in the hip by 1.5cm

Tilly provides some very handy tips for making a jersey Bettine, including the dimensions for the neckband.

Cutting the jersey was more difficult than cutting a woven fabric. I’d already invested in a rotary cutter, mat and pattern weights (partly because I find cutting with scissors super annoying). I must add that I made the job more difficult for myself by using stripes, which I tried my utmost to keep horizontal.

For the sewing, I also purchased some ballpoint needles and made use of my walking foot for the first time on my new machine. I just bought a cheap generic one as part of a set of feet.

The first step was constructing the neckline, which was a real baptism of fire. I wasn’t sure I would be able to manage the stretch fabric without pulling the neck out of shape. I carefully pinned the fabric first, using ballpoint pins.

Heartbreakingly, I had to unpick my first attempt as the neckband was too long. I wasn’t surprised as I had adjusted the bodice neckline to reduce gape, but it was still annoying. I also hadn’t really understood the instruction to baste in place first, meaning I used a stretch stitch, which was a pain to remove.

Here is the finished neckline.

I’m really thrilled with it! Loads of firsts here- first stretch, first neckband, first use of a twin needle. I probably could have reduced the neckband by another centimetre or two, but I think this is good enough.

I even used the same technique to finish the pocket edges. I thought it might be cute to carry the design element from the neck. Lots of people seem to think the pockets as written aren’t a great idea in jersey, so I created single layer pockets. I stitched the pocket bags onto the skirt front using my twin needle, again trying to keep the details consistent in this garment. It felt a little strange to go my own way with no instructions to follow, but it seemed to work.

So far I’m cautiously optimistic about this project. I’ve found myself taking a lot of time to get things right- I pulled those pocket edgings out so many times to try and get them to lie flat! However I haven’t begrudged the time. I’m just hoping it’s going to pay off in the form of a lovely dress.

Pattern: Bettine by Tilly and the Buttons

Fabric: 2m (140cm wide) cotton jersey from Sew Over It


I’ve loved Bettine pretty much from first sight. I was unsure about buying the pattern as I read a few blog posts that weren’t entirely positive about it, but I finally took the plunge last year and picked it up with three metres of beautiful double gauze. It’s by the same people that made the fabric for my unicorn top.

I had hoped to make this dress for my Brazil trip last year, but I bumped it in favour of my spur-of-the-moment zebra shorts

After reading even more blog posts, I decided to make some modifications to the pattern. This involved tracing a pattern for the first time ever. It took ages, but it’s nice to know that I still have the original pattern if my adjustments turn out to be a disaster.

img_6809

I curved the waist seams following this post. I also found this post by Tilly herself very helpful, and I did my first full bust adjustment.

The first stage of the dress is constructing the bodice. This is fairly straightforward. The neckline stitching is a little fiddly. I found the most difficult bit was easing the side seams, which is only necessary because of the FBA. However, having tried on, I’m very happy I made the adjustment.



I’ve also constructed the pockets. This material is quite transparent, so I’m going to have to buy or make a half-slip to wear underneath. As you can see, I managed to mess the left pocket bag up slightly. I’m hoping that adding another centimetre to the front seam allowances in that area on both sides (marked by the pins) will fix this as it would be very time-consuming to rectify this error.

So far, I’d say that this dress has mostly lived up to the promise of being a straightforward sew.