A panoply of (sometimes) lovingly handmade crud.

Tag Archives: rockets

I just about finished sewing my dress in time for the wedding.ย If I ever mention starting a garment with less than a week before the event I am due to wear it, someone please slap me. This dress jumps straight to the top of the list of most complex garments I have ever made. The difficulty was due to a combination of altering the pattern and working with tricky and costly fabrics. However, as has fortunately been the case often in my craft life, she who dares wins!

My initials are MEAD, so I was kind of tickled by this sign.

This was my first time lining a dress. I underlined the bodice and lined the skirt with lovely navy viscose. I stupidly cut the skirt lining too short, so I had to fudge lengthening it with some ribbon. I didn’t make the best choice in selecting velvet ribbon- though pretty, it’s much stiffer than the fluid viscose- but actually it looks okay under the voile.

For the first time, I added snaps to the dress to stop my bra straps peeking out. It worked pretty well! Here you can also see the guts of the dress- probably the best wrong side finish I’ve ever achieved.

This was such a fun summer wedding. So much so that I forgot to take any pictures except the few next to the sign on the way! Thankfully Glory posted this candid picture that shows the back of the dress.

I love how the scooped back turned out. I will most likely incorporate this change into any further Southports.

Further details about the alterations I made to the pattern can be found here.

Here are my two lovely Southports.


I really struggled when it came to what I wanted to wear to this wedding. I have a couple of beautiful silk dresses that I have worn to other friends’ weddings, but this is a younger wedding and I wanted to wear something a bit more fun. I was also keen to make something. I had planned to make my Liberty Macaron, but I went off that idea quite quickly after finishing the toile. Even though most of my clothes are quite quirky, when it comes to lines, I like classic simplicity. Somehow a sweetheart neckline didn’t feel right.

I spotted some beautiful viscose on Fabric Godmother, featuring a cute cocktail print, and thought it would make a great maxi Southport. I vacillated about whether and how much to get, and in the end it sold out before I could buy any. I was sad about that, but the fabric was cream and I was definitely uncertain about wearing a full-length white dress to someone else’s wedding. After some more looking around, I came across this rocket-print fabric that I had spotted on Fabric Godmother before. Soon, two metres were winging their way to me.

I am slightly worried that I am insane. My previous attempt at working with silk was an absolute disaster. I have also never worked with a sheer fabric. I have less than two weeks to learn a lot of new skills, and any mistakes will mean ruining the costly fabric.

I’m also worried the dress won’t turn out the way it looks in my head. The fabric is darkest navy and I’m just not sure the whole thing will work.

Planned changes

  • Eliminate button band again
  • Cut back bodice neckline to match front bodice neckline (perhaps even an inch deeper) to give a dressier effect
  • Fully line bodice. I still haven’t fully decided whether I will be underlining or lining. At the moment, I’m thinking underlining because I don’t want the seams to be visible through the sheer fabric. But then how will I finish the neckline and armholes? Will the bias binding finish work through two layers? This is so complicated! I need to keep reading up on this. Current plan is to underline and use bias binding to finish.
  • Add modesty lining to the upper part of the skirt
  • Eliminate pockets. These are two words I thought I would never type, but I don’t think they are a good idea in such a light fabric. Also, because the dress is sheer, you would be able to see the contents. Also also, the Southport directions don’t seem indicate to finish the side seams, and I need French seams to finish the silk voile. Update: I just didn’t see the instruction to finish the side seams when I made my my previous Southport. Comment about French seams still stands.
  • Remove 2cm length in a curve on the back bodice. Add scant 1cm length in a curve on the front bodice. Really, I probably need to do an FBA, but that’s for another time.

So far the cutting has gone okay. 2m wasย only just enough to squeak out this dress. If you are using a directional print or making a size bigger than about a 4, you will definitely need more. I also cut the selvedges as part of the pieces for the skirt front as I had practiced a seam finish that incorporates them.

The underlining was pretty fiddly. The silk is actually okay to work with as it is textured. The viscose is more tricky, being drapey. It just takes lots of time to smooth etc. I hand-basted the front and back pieces.


I found the bias binding finish even more annoying the second time! It’s just really fiddly. Not helped by using satin binding, but I thought that would be better suited to my fabric. Even more infuriatingly, the neckline doesn’t really sit flat. Pressing helped a bit. Maybe it’s because I didn’t clip the seam allowances.

Fortunately I took a break after writing the above paragraph. Things seemed less negative when I came back to the bodice, and the bias binding one the armholes went much better.

I’ve got to say I’ve enjoyed learning and trying out some tailoring techniques on this dress. I’m cautiously optimistic about the result.

Notes:

  • Adding length to the bodiceย in a curve also adds width to the pattern piece! I nearly got in trouble because the waist sections of my bodice and skirt weren’t the same length when I came to join them

Fabric: 2m silk voile, 1.5m viscose for lining

Pattern: Southport dress (maxi version)