A panoply of (sometimes) lovingly handmade crud.

Tag Archives: new techniques

After the relative success of my raindrop-print Bettine, I was excited to cut another. I picked up this remnant of striped jersey from Sew Over It a few weeks ago. I thought £7.50 was very reasonable for two metres, and when I was looking for more information online, I discovered that it’s still available for £13/m. I love a bargain. I’ve never worked with a knit fabric before, and getting this fabric so cheaply helped me to push myself.

I made a few further changes to the pattern

  • Reduced neckline by 1cm on each side to prevent gaping (tutorial here)
  • Reduced length of bodice by one inch
  • Curved front skirt waistline to match back
  • Removed 4cm (2cm each side) from neckband. In future,  remove 5 or 6cm
  • Stabilised areas with wonder tape before twin needle stitching to reduce tunnelling
  • Finished pocket edgings with the same technique as the neckline. Used 23cm strip of fabric
  • Single layer pockets
  • Reduced curve in the hip by 1.5cm

Tilly provides some very handy tips for making a jersey Bettine, including the dimensions for the neckband.

Cutting the jersey was more difficult than cutting a woven fabric. I’d already invested in a rotary cutter, mat and pattern weights (partly because I find cutting with scissors super annoying). I must add that I made the job more difficult for myself by using stripes, which I tried my utmost to keep horizontal.

For the sewing, I also purchased some ballpoint needles and made use of my walking foot for the first time on my new machine. I just bought a cheap generic one as part of a set of feet.

The first step was constructing the neckline, which was a real baptism of fire. I wasn’t sure I would be able to manage the stretch fabric without pulling the neck out of shape. I carefully pinned the fabric first, using ballpoint pins.

Heartbreakingly, I had to unpick my first attempt as the neckband was too long. I wasn’t surprised as I had adjusted the bodice neckline to reduce gape, but it was still annoying. I also hadn’t really understood the instruction to baste in place first, meaning I used a stretch stitch, which was a pain to remove.

Here is the finished neckline.

I’m really thrilled with it! Loads of firsts here- first stretch, first neckband, first use of a twin needle. I probably could have reduced the neckband by another centimetre or two, but I think this is good enough.

I even used the same technique to finish the pocket edges. I thought it might be cute to carry the design element from the neck. Lots of people seem to think the pockets as written aren’t a great idea in jersey, so I created single layer pockets. I stitched the pocket bags onto the skirt front using my twin needle, again trying to keep the details consistent in this garment. It felt a little strange to go my own way with no instructions to follow, but it seemed to work.

So far I’m cautiously optimistic about this project. I’ve found myself taking a lot of time to get things right- I pulled those pocket edgings out so many times to try and get them to lie flat! However I haven’t begrudged the time. I’m just hoping it’s going to pay off in the form of a lovely dress.

Pattern: Bettine by Tilly and the Buttons

Fabric: 2m (140cm wide) cotton jersey from Sew Over It

Advertisements