A panoply of (sometimes) lovingly handmade crud.

Tag Archives: macaron dress

I bought this fabric just over a year ago, planning to make a third Day Dress (previous version 1, 2). I saw someone else using it at my disastrous silk cami workshop (Sew Over It were stocking it at the time) and fell in love. Although I like the Day Dress, my pink Macaron is probably the most flattering dress I have for day wear. I decided to have a go at making a version without the contrast bodice, which no one else seems to have previously attempted. I certainly could not find any blog posts about doing this even after extensive searching.

This post contains detailed notes about how I created a solid Macaron by combining the yoke and bodice pattern pieces. I will also describe how I lined this dress- I don’t think I did the best job, it’s more a case of notes for future learning.

I overlapped the bodice and yoke pattern pieces by 3cm and traced. On the front I also increased one of the darts by 5mm since some length seems to be taken out at the seam between the pieces. I probably should have done this on the waist dart but I took it out of the side dart- I don’t imagine this will make much difference. I just did the back straight and did not alter the shaping- I’m fairly confident this will work for my figure.

I also decided to make my life difficult by lining the dress. The neckline facing on my first Macaron is a travesty (partly my error, partly the pattern). At present I have only planned lining the bodice. I’ll see how I feel when I get to the skirt.

I easily got this dress out of 2m of fabric by book folding it. I nearly always do this and it saves loads of material. Pattern companies tend to massively overestimate the fabric requirements, as well as not having cutting diagrams that are as efficient as possible. It’s really wasteful and annoying. Bear mind that I also cut out two bodices.

I cut a size 10 with adjustments as described previously. I interfaced the waistband for extra stability. Since I had plenty of fabric, I decided to self-line the bodice so I don’t have to worry if the lining ever peeks out at the neck seam. I pinned and machine basted the darts as pleats in the lining pieces, trying to have the excess fabric fall in the opposite direction to the darts in the shell.

I made up the bodice as directed, following the same instructions for the lining. I joined the two pieces RS together at the neck. Note: do not finish the neckline edges before stitching.

I machined the bottom hem of the lining to the seam allowance between the bodice and waistband pieces at the front and back separately.

This is how the bodice looked just before I attached the sleeves. I’m very happy that I decided to line the bodice since the fabric is so delicate. It makes the dress feel much more classy and professional.

I attached the sleeves as in the pattern, to both layers of bodice and lining. I then finished the seam as one piece. I haven’t yet removed my hand-basting because I think it looks really cute.

I decided it would be silly to line the bodice but not the skirt. I cut out additional skirt pieces using the leftover lining from my coat. I shortened the pieces by about 3 inches and incorporated the selvedges at the bottom to save hemming (lazy sewing for the win!) I made up the skirt lining as directed, ironing the pleats in the opposite direction to those in the shell.

I had planned to attach the skirt and lining within the waistband seam allowance before I sewed the skirt to the bodice. However I wasn’t sure about having additional weight of the lining pulling down on the waistband piece. The fabric really is very delicate. Thank goodness I decided to interface it!

In the end I couldn’t think of another solution. Weirdly I had an issue with having a lot of extra length in my bodice compared to the skirt, but only at the front. I was able to ease it, but it took three attempts. When I tried the dress on, it looked weird. I tested the pockets and… they were on the back of the dress. I had seamed the wrong side of the skirt 🤦🏽‍♀️

My inability to tell left from right bites me again. I spent ages undoing the incorrect stitching and sewing the skirt together on the correct side. I then re-did the waist seam and it went together much more smoothly.

I tried on the dress and I’m really happy with the fit. I love the way this dress makes my figure look.

The last step was to insert the zip. That part was relatively pain-free. I hand-tacked the dress to the zip before stitching to ensure the waistband seams would line up- this definitely helped. I probably should have used a 1cm seam allowance rather than 1.5cm because the dress is a teeny bit tight at the waist. My makes normally give slightly with wear, so I don’t think it’s worth the bother of reinstalling. Now just the hem and a bit of finishing and this dress will be ready!

Cost breakdown

Fabric: 2m of viscose costing £18 (I paid £2.95 p&p for this and the fabric for my cloud tee). I also used less than a metre of viscose lining (a scrap so I will not cost this)

Pattern: £18 (second use)

Notions: All bought ages ago so no idea. Let’s provisionally say £5

Total: About £33

Advertisements

After all the effort that went into finishing my Macaron, I nearly destroyed the dress on its second outing. I was climbing over a fence to get out of a park and decided to show off by jumping down. I managed to catch the skirt on one of the spikes, popping most of the side seam (which looked great for the rest of the evening) and also tearing the fabric.

Mere hours before the fateful incident. Innocent times.

After deciding not to chuck the dress in the bin, I thought that a patch was the best solution. It wouldn’t interrupt the floral pattern and it would also serve as a permanent memorial to my ongoing foolishness.

I bought a few patches in India that I thought might do the job. However, when searching through my craft stash for something else, I found a patch that I bought from Hand Over Your Fairy Cakes. The colour palette complements my Macaron pretty well, and it was just big enough to cover the tear.

I started by loosely stitching up the rip.

I used my embroidery hoop because my aim was to make sure the fabric was hanging true before patching.

The fact that I had an iron-on patch made my job nice and easy. I could perfectly position the patch before securing with stitches.

I used the embroidery hoop again because the fabric is so light.

I didn’t do anything fancier than some small running stitches hidden in the white border. The patch is only just bigger than the hole in the fabric but I hope the glue will hold the fibres together. Also, the back of the skirt isn’t a high-stress area on the dress (unless you are doing questionable activities while wearing it.)

Overall, I found it surprisingly enjoyable to mend my dress. Even though I’m not totally in love with it, I think Macaron is a great pattern that looks really nice on, and I always get nice compliments when I wear it.

(Sorry not sorry for the cheesy pic)


I finished sewing my Macaron dress!

Sewing projects always trick me into thinking there’s hardly any work left. When I wrote my previous post about this dress, I basically thought I was done as I had constructed the bodice, skirt and sleeves. I hadn’t factored easing in the sleeves, lots of seam finishing (a step I was initially planning to skip), joining the pieces, inserting the zip and finishing the hem.

In between the two phases of making the dress, I had my sewing lesson to help me fit the bodice. Turned out that it was a fairly straightforward fix of reducing length in the back. We took a curved line out of the upper bodice so as not to disturb the style line of the pink fabric. Apparently, this is an alteration that is commonly needed if you have a larger bust and an upright posture. In fact, I have had issues with the back bodice in other dresses, so this is definitely a hot tip for future makes.

Things I’ve learnt for my next Macaron:

  • Be careful to transfer all markings from pattern to fabric
  • Be precise when sewing bodice seams so the pieces match at the sides

I don’t know what it is about this pattern, but it really emphasises the waist, which I absolutely love. I’m confident that I will be able to wear my dress to parties without foundation garments, eat and dance all I like, and it’ll still be flattering.

I’m really looking forward to starting work on my second iteration of this pattern. After being inspired by a dress on Pinterest, I’m on the look-out for some lace to complement the Liberty fabric. I do love a challenge!

Pattern: Macaron by Colette Patterns

Fabric: Under 2m pink rayon from Indonesia. Contrast fabric from Goldhawk Road, used less than 1m


I was scrolling though Pinterest the other day, looking for pinspiration, when I was reminded of the Macaron dress I planned to make nearly two years ago.

I’ve got a wedding coming up in a few months, and I think this dress would be perfect. I immediately dug out the pattern pieces I cut over a year ago.

I’m pretty much planning for this project to be a toile. I have a weird love-hate relationship with the fabrics I chose. I never normally wear pink, but I couldn’t resist the pretty floral pattern and birds. I remain unsure about whether the blue looks good, or the top of the dress would pop more with a white contrast.

Anyway, it will be a pleasant surprise if I end up with a wearable dress. I’ve never bothered making a toile before, but I paid full price for the Liberty fabric and I’m really looking for perfection in the final garment. Macaron is quite an intricate pattern so I’m a little apprehensive about my ability to fix fitting problems. Eek!

I whizzed through the steps of constructing the bodice pretty quickly.

As soon as I tried on the bodice, I realised there were big problems. The fit on the waist was tight and the bust seemed okay, but I had a lot of fabric pooling in the back.

You can even see the bagginess on the hanger. I tried pinching in the side seams and tugging in various directions, but I couldn’t figure out how to make it lie flat. This is my first solo attempt at a fitted bodice.

I decided to trace a copy of the bodice pattern to make my adjustments. This is a bit of a case of locking the stable door after the horse has bolted- since I cut out the pattern pieces, I’ve lost the larger sizes. However, this way I still have a back-up in case my alterations somehow make the fit even worse.

I ended up deciding to book a private sewing lesson to get some expert fitting advice. I completed as many steps as possible to take along. I have to say, Macaron is surprisingly easy to construct given the polished final look of the dress.

Slashing the pleats to place the pockets was a bit scary, but I adore the final result. This is what the pieces looked like before my lesson.

Wish me luck!

Pattern: Macaron by Collette Patterns

Fabric: Viscose bought on holiday in Indonesia. The blue is some random fabric purchased on Goldhawk Road