Last week I went to Wilderness festival. I have been mostly blissfully ignorant of the rubbish problem when I have attended festivals before. I’m sure I felt a little bothered by the bins full of disposable cups and plates, and the massive piles of perfectly good items that attendees leave behind. But now my eyes are much more open to the problem.
I armed myself with my vacuum flask, water bottle, keep cup, metal straw and cutlery. This was quite a lot of equipment to have with me at all times, but I brought my beloved yellow backpack along largely for the purpose of carrying these items. Aaaaand…. like the best laid plans of mice and men, it went completely out of the window.
I learnt that I actually find it very difficult to make a special request for myself when the infrastructure is not set up to deal with it. All of the plating was set up and I just felt bad asking the vendors to change it so that it would fit in my containers. Wilderness has a lot of ego-massaging placatory messages, such as the dishes being compostable, but of course there is a lot of upstream waste associated with making the disposable items.
Because I am extra af and dangerously addicted to espresso, I took my stovetop coffee maker and milk frother for my morning flat white. So I at least didn’t use any coffee cups during the weekend.
One thing that the zero waste mindset helped me with was with making purchases. Wilderness is a festival where people feel very free to dress outlandishly, which I am very much on board with. This year was one of my first festival experiences where I had some disposable income available. It would have been very easy to spend a lot of money on items that are just not wearable in any other context. I was very much enamoured of this pompom headdress.
In the end, I bought a vintage beaded jacket that was actually very restrained for the festival, but just about straddles the line between jazzy and useful in my real life.
I also bought some little sparkly jewels to wear on my forehead because I couldn’t resist getting a little something.
The festival did allow me to get out some much-loved but seldom-worn items. I wore my rocket Southport dress for just the second time and it was perfect for this event.
I brought the circuit sentiments kit I have had at home for years and used it to fashion my own light-up headdress using a flower crown I bought a few years ago on eBay. The LED kits are the kind of impulse craft purchase that I would like to stop making as much. I used a few of the items to make my Port Charlotte jumper light up when I was pretending it was a Christmas jumper.
I can’t believe that I’m finally getting to type these words- I have finished making my Sew Over It 1960s coat. Overall, I’m pretty happy with it. Though I’m not that happy with the pictures, this one excites me quite a lot.
This is what the back looks like.
Something I found notable about this project is that I never felt relaxed during any part of the making process. It felt as if disaster could strike at any minute. I suppose that’s the danger of investing such an enormous amount of time and money into something.
All in all, the hand-sewing required after the final class took a full day. There’s a little bit of pulling on the bottom hem that didn’t press out, but I haven’t fixed it because I’m considering taking some length out of the coat.
The next challenge was to select the buttons that would adorn the coat. I took her on a trip to Liberty to try out some different options. Black was the obvious choice, but I wanted to see if anything else tickled my fancy.
In the end, I picked the beautiful black glass buttons in the finished pictures. Nothing wrong with the obvious choice if it’s the right one! I decided to take the coat on a second trip to Soho to have the buttonholes professionally done. Marking out the holes was another source of anxiety. A small mistake could mean that the coat would never hang nicely.
I think my coat enjoyed the second trip into town. I’d rung up DM Buttons the day before to be told that the following day was their last before the holiday, so to go as early as possible. We got to see the Christmas decorations in the early morning light.
Before finding our way down a dark and scary alley to the lovely studio.
It was so cool seeing all the specialist equipment he has to finish garments. And the finished buttonholes look fabulous. I went for bar tacks for any buttonhole aficionados out there.
Getting the buttons to line up took FOREVER.
I have to say that the chances of me making another coat like this are slim. It’s an incredibly labour intensive process, and I’m not entirely convinced that what I can do at home is better than what I can buy. But I am happy with my fabric choices.
My biggest regret is not making the pockets bigger. This is a perennial problem I have with SOI patterns, so be warned if you like a capacious pocket.
Pattern: Sew Over It 1960s coat (size 12 with some fitting adjustments)
Fabric: 3m of wool and lining from Goldbrick Fabrics (I had 1m of wool left over)
Homework for the Sew Over It class this week (after week three) was super arduous. I spent the best part of two days working on it.
I started by unpicking part of the collar to insert a hanging chain.
I then tacked the edges of the fronts and collar down in preparation for pressing. That took ages and was quite stressful as my fabric doesn’t like steam. I also had to hand stitch the neckline facings together, which apparently stops the inside of the collar ripping when you hang the coat up.
Another task was putting the lining together, also known as making a second coat to put inside the first one.
The final thing I did was tack the sleeves into the coat so I can check the fit properly. The shoulder pads aren’t inserted in these pics, which is why the shoulders look a bit droopy.
I felt like there was still an awful lot of work to do during the final class, but I spent hours on the homework, so I just had to hope that I wouldget closer to the finish line during the lesson.
After the lesson
Much of the lesson was spent inserting the shoulder pads and wadding. It was quite fiddly and I needed a lot of help from Julie to get the shoulder pads in the right place- this was my first time using them. Inserting wadding wasn’t in the instructions, but it was necessary in my fabric because the seam allowances were showing through at the shoulders, making them appear wavy.
The only other thing I managed to do was attach the lining to the facings of the coat. This was extremely fiddly and required me to go over a couple of bits. The wool and lining are very different weights, so I had to work to get them to feed through the machine at the same rate.
It’s not perfect, but I’m happy enough. The coat looks so much more finished now that all of the guts are covered up.
This is what the coat currently looks like on.
For the first time, I feel cautiously optimistic about coming out with a coat that I’m happy with. I now need to:
- Steam the collar to get it to lie flat
- Hem the sleeves
- Trim and hem the coat
- Buy buttons
- Mark buttonholes and take to DM Buttons to get them done
- Attach buttons
- Remove tacking and gently and press the coat
Still a way to go, but hopefully I will manage to get everything finished for when the cold weather truly comes to London.
I started to feel a bit less grumpy about the coat after getting a bit more sleep following the second class. I have a ridiculous number of things on at the moment and it’s hard to stay on top of it all.
I finished attaching the last piece of interfacing and sewed up some of the seams I was supposed to do in the first class. I managed to cut out all of my lining pieces. I had around 1m left (136cm wide). I was pretty lazy with the lining so could potentially have used less than 2m.
This week, I started to feel like I wasn’t miles behind everyone else for the first time. I attached the collar, which is very fiddly but the coat is starting to take shape.
I have a lot of pressing to do in the next week, as well as making up the lining and doing some work on the sleeves. However, it’s half-term next week and I have the day off on Monday, so I will have some breathing space. I’m hopeful that I will be able to get everything done to be able to come out with a finished coat.
Since I had only attended half of the first class at Sew Over It, I had a LOT of homework to do in the following week. I still had to cut out many of my paper pieces as well as all of the fashion fabric, lining and interfacing; test the fabric for how much steam it can take, test the interfacing, and fuse the interfacing to the fabric.
I had 1.2m of fabric left at this point- with one small piece to cut. Once more, I got fabric of a non-standard width from Goldbrick Fabrics. It’s 152cm wide. This is something to watch when fabric is over £70/m! However I’m kind of excited at the prospect of making a pencil skirt from the remnant.
I think that one of my pattern pieces is missing an alteration so most of the front pieces aren’t cut out. I also haven’t tackled cutting any lining yet. However, I cut and fused everything I was confident with.
After the class
Managed to cut out all of my fabric and interfacing, and fuse them together. The rest of the class was spent working on the pockets.
It’s quite nice to see my fabric and lining playing together.
I have to say I am not really enjoying coat class rn. I booked it before realising I was going to be crazy busy. Essentially, I have a stressful day at work, go and be stressed for three more hours, then get told to do a lot of stuff that I don’t have time to do during the week.
I do think it’s given me a bit more empathy for the kids I work with. Being stuck in a class, knowing that you’re behind and can’t catch up sucks.
Loads of homework again this week, and I’ll also be at a quidditch tournament in Edinburgh all weekend. We’ll see how I manage that.