A panoply of (sometimes) lovingly handmade crud.

Tag Archives: knit

Without tempting fate, this should be my last WiP Wednesday about this project. I did quite a lot more work on this sweater after my most recent post about it, which I think is worthy of some blog space.

Finishing the sleeves was quite straightforward and I joined the sleeves and body for the yoke. It was quite fun to work the marlisle pattern again, which was just as well because the first few rounds of the yoke feel incredibly long after the relative speed of the sleeves.

Checking the finished projects on Ravelry, I saw that there was a lot of variability in the necklines. Some knitters (including me) write quite detailed notes on their projects, while others don’t add anything. It was hard to tell how my project was going to turn out. I added a lifeline before working the neck shaping and I’m glad that I did.

A few rows into the neck shaping as written, it became obvious that the pattern is for a boat neck. Boat is one of my least favourite necklines- I just don’t think it suits me. I ripped back to my lifeline before going on holiday.

In the end I decided to tackle changing the neckline in two ways. I added more increases (every other row rather than once every three rows) along the raglan seams in the body on both the front and back. Since I have quite broad shoulders, I don’t like excess fabric  to accentuate that part of my body. I also changed the short-row shaping on the front neckline.

I had to do some more ripping when I accidentally knit the additional raglan decreases before I had calculated the changes to the neckline shaping. I used a combination of eyeballing and maths to work out how I wanted it to look. I think I’ve mentioned before that one of my pet peeves is having a t-shirt showing when I am wearing a sweater. I just think it looks messy. So my aim was a close neck that should cover the layer beneath.

I visually estimated the number of stitches I wanted left and then calculated which rate of decreases would get me closest

I took some pictures of the notebook pages where I did my quick maths. Kate Davies wrote a recent blog post about knitting and creativity. It discusses the idea that knitting is ‘relaxing’ at the expense of allowing knitting to be creative, engaging and absorbing. This relates to the idea that ‘women’s work’ is something straightforward and mindless, or even frivolous.

Even when following a pattern, knitting can involve a lot of processes that are not remotely relaxing. Undoing work can be frustrating. Figuring out how to change a design is a highly creative problem-solving endeavour, bringing to bear all the knowledge one gains through years of practice. It is an engineering project. Part of the reason I write all of these WiP posts is to give an impression of the work that goes on behind the scenes. When you say, “I made it,” most people have no idea of what that actually means.

In the end, I didn’t have quite enough of the light blue kidsilk to finish the sweater, so I had to buy one more ball. Somehow I hadn’t noticed that the balls are £8.95 each last time I went to John Lewis! I will have most of a ball left over.

The neck ribbing is virtually done now, so the final stage will be the finishing. I am using I-cord edging throughout, which I hope will give a very clean finish. It’s currently a bit warm for a sweater, but knowing English weather I imagine I will find an opportunity to get some pics once this garment is ready to wear.

Previous posts in this series

Planning

Ripping out a cardigan

Frogging a sweater

WiP Weds 1

WiP Weds 2

WiP Weds 3

Ravelry project page

Advertisements

Decided to make a little post about this toy clanger, that I never finished knitting, in case it helps anyone else considering using this pattern. Overall I think the pattern is good and would produce a lovely finished item. Here is the Ravelry project page if you would like more information about the pattern etc.

I got quite a way into making this toy a good few years ago. I think I originally started it because my boyfriend at the time liked the Clangers. We split up about ten years ago now so I’m not sure that’s right. But I do know that I’ve been carrying this WiP around for a long time.

I think I got stuck on the pattern because I was a relatively inexperienced knitter at the time. I always thought I would finish it one day, hence bringing it with me on several house moves.

I had a moth problem in one of my previous houses and I’m sure that I froze this project to kill the larvae. However, when I picked it up again recently, I realised that both the yarn and the knitting had quite bad damage and evidence of infestation. I initially planned to keep what yarn I could salvage before realising- if I haven’t finished a project in a decade, when am I going to get to it? Even if I did finish it, do I actually have any need or want for the finished item?

I finally threw poor half-finished clanger the bin. I will now need to freeze the basket it was stored in as well as my mermaid Humboldt sweater, both of which were in the vicinity of the infestation.

Discarding the clanger is part of a wider attempt I’m making to de-clutter. My mother and aunt, probably the biggest female influences in my family, are enormous hoarders. While I felt that I have done my best to avoid following in their footsteps, I can’t deny that I own a lot of stuff (edit: I have denied this many times but I have now accepted the fact). Way more stuff, in fact, than it is reasonable for someone who does not own property to have. Moving the stuff between rental properties every couple years (an unfortunate but necessary part of living in London without familial wealth) is an enormous burden, both literally and metaphorically.

I have set myself a target of getting rid of half my stuff. Basically I am the Thanos of my own possessions. I’m not quite sure how I will actually quantify whether it was actually half, but I will know in myself if I have met my target. I will probably write a separate blog post about the de-clutter, but I will say that the project reflects an attempt in my life to get rid of things that no longer serve me. My relaxed hair, my burdensome possessions, and hopefully some psychological habits too. To the left, to the left.


This sweater has been in my WiP basket for several months now. Shortly after my last blog post (and taking this photo), I ran out of turquoise yarn.

I was also a bit uncertain about how to do the ombre on the sleeves. All in all, I was not feeling so inspired by this project, but fortunately that gave me the impetus to finish my She Loves Wool sweater that had been similarly languishing.

Looking at this photo with fresh eyes, I felt that it probably was time to start changing colours soon. I think it will make sense visually to have the colour change over my elbow.

Another complicating factor was the yarn. I had hoped that I had salvaged enough from my Bay sweater for this whole project but, alas, that was not the case. Even worse, I wasn’t sure which colourways of Kidsilk Haze I was working with.

I’m sure Stitch’n’Bitch, my bible in my early years as a knitter, recommends that you never throw ball bands away and thus avoid these problems. I know I followed that advice for quite some time, but old ball bands are a super annoying thing to have lying around the house. I’ve discarded them all in various house moves.

img_6209

What would make sense in the modern world would be to record this information on Ravelry. Now-me generally does that (I would like to be more fastidious about including all info, including dye lots), but unfortunately the Monique of 2013 did not. I have the colour recorded as ‘blue-green.’ I was fairly sure that the colour was ‘peacock’ but when I checked the Rowan website, there are two other shades that fit the bill. I had hoped to buy the extra yarn on eBay, but in the end I made the pilgrimage to John Lewis, praying that they had the right colours in stock. I took my swatch with me to compare.

img_6210

Not an exact match, but perhaps it is unreasonable to expect the colours to be a super close match when you buy extra yarn over six years later.

I wasn’t sure whether I would have enough of the lighter colour either, but I decided not to buy more at this stage. What I will do to try and circumvent that problem is make the section with the sequins longer than originally planned. I also wanted to use up the Kidsilk Haze Glamour.

I spent quite a bit of time knitting over the May bank holiday weekend. I was coming off an incredibly stressful week, and I needed the time to myself.

I finished the second sleeve and realised it made more sense to use up all of the turquoise yarn in the sleeves. Hopefully this will mean I have enough of the pale blue to finish the yoke without having to purchase any additional yarn.

I tried my best to make the sleeves match by weighing the yarn as I went along. Unfortunately I only have digital food scales that measure to the closest gram. Not especially helpful with mohair, which is incredibly light. Hopefully a local drug dealer will donate a more precise scale to one of the charity shops I frequent.

I have now ripped the first sleeve back to the turquoise area to insert the remaining yarn. The sleeves are lovely and quick to work so should be on to the yoke soon.

Before unravelling the first sleeve

I really really hope I am going to come out with a sweater that I am happy with. I have put a lot of work into recycling two old garments into this piece so I will be quite heartbroken if I don’t like the way it turns out. That being said, I am having a cropped sweater moment so it should slide seamlessly into my wardrobe as long as all goes to plan.

Previous posts in this series

Planning

Ripping out a cardigan

Frogging a sweater

WiP Weds 1

Ravelry project page


I finished knitting the modified spindrift shawl I’m making for my aunt with the yarn I picked up at Countess Ablaze when I was in Manchester last year. I decided to omit the eyelet rows because I didn’t want the shawl to look busy. I think the yarn speaks for itself. However, it did mean that knitting it was unbelievably boring. I just don’t like knitting stocking stitch flat, but I do really like the way that it looks.

I took these pictures when I was at Hampton Court Palace for my embroidery workshop.

I ended up doing quite a few rows of garter stitch for the border since I had quite a bit of yarn left. I didn’t want to risk running out of yarn but I needn’t have worried. I actually finished the knitting and cut the yarn in Finland, before realising that I didn’t have a darning needle with me for the sewn bind-off.

I have no recollection of how I did it the last time. I’m fairly sure I used this technique on my Bad Day shawl, since I got the idea from looking back at the boneyard shawl pattern. I used this technique. It took HOURS.

Anyway, I hope that my aunt will appreciate this gift and get a lot of use out of it.

Pattern: Spindrift shawl (modified)

Yarn: Viscount of Spark by Countess Ablaze in Bienvenue

Ravelry project page

Cost: £20


I am coming to the end of knitting my galaxy shawl, for which I am grateful. The endless stocking stitch has been deeply uninspiring to work on. I had a holiday coming up and felt that I might be able to finish the shawl on one of the plane journeys. My mind turned to new projects.

Since I was going back to Finland, it seemed appropriate to use the yarn I bought when I visited in the summer. The beautiful ice blue also seemed appropriate to the freezing weather conditions.

I had planned all along for this skein to become a third pair of convertible fingerless gloves/mittens (striped pair, rainbow pair). These are intended to go with the Kelly anorak I am working on.

I found an hour to wind the skein before my trip and packed my 2.5mm DPNs and a spare for any casting on/off that might be required.

I am trying to recreate the most recent (rainbow) pair of these mitts that I made. Unfortunately, I don’t seem to have taken any notes beyond mentioning that I improvised a size in between medium and large. I wonder if I maybe took notes in Adobe reader (as you would take notes on a physical copy of a pattern) and they have been lost. I am trying to recreate the same process I followed.

I used a 3.25mm needle for the tubular cast on. It looks a little bit loose so I will try to dig out a 3mm or even 2.75mm DPN for the second glove. It’s not bad enough that it’s worth redoing.

At the moment, I am working on the fingers of the first glove. Things are going well so far. I’m enjoying working on something smaller, and with more thought required than my last project.

Pattern: Modified version of Smartphone Friendly Mitts

Yarn: Hedgehog Fibres

Ravelry project page


I’ve been working on a shawl using the skein of yarn I picked up from Countess Ablaze when I was in Manchester a few weeks ago.

It’s very hard to capture the colour of this yarn on camera. This shawl is going to be a present for my auntie but it’ll be late for Xmas, partly because I’m working with a broken finger.

The shawl is growing quite slowly. It’s been a while since I made a plain stocking wrap like this. The last time was probably my stormy skies one. It’s pretty dull knitting but I think the final result will be worth it.

Pattern: Spindrift shawl

Yarn: Viscount of Spark by Countess Ablaze

Ravelry project page


I bought some fibre in Finland with the aim of knitting some replacements for our kitchen sponges. I’m pleased to say that I’ve finished! And I thought I would write up a quick pattern.

When I searched on Ravelry, I couldn’t find many free patterns for simple dishcloths, hence making up my own. I believe the technical term for this stitch pattern is a 3*3 garter rib.

Gauge

22sts and 38 rows to 10cm in pattern.

I used a 3.5mm needle. I tried a 4mm first but I wasn’t happy with how the work looked.

Can you tell which is the dodgy one?

A characteristic of this yarn is that it varies significantly in width- not really a problem, especially since a dischcloth doesn’t exactly have to be an item of great beauty, but I don’t like uneven knitting.

Pattern

Cast on 27 stitches. I used long-tail CO.

Rows 1-3: Knit

4 (WS). K3 P3

5 (RS). K

Repeat rows 4-5 until work reaches desired length (I went for 12cm).

Knit two more rows.

Cast off.

I used the yarn tail to crochet a hanging loop in the corner.