A panoply of (sometimes) lovingly handmade crud.

Tag Archives: blouse

I’m so excited to start a new sewing project. I haven’t had any time to sew for ages. I bought this fabric at least 18 months ago. I was inspired when I saw a similar fabric on Instagram, made up into a very cute top. This is my favourite leaf shape- I have three pieces of jewellery and a shirt featuring it. When I saw this in the Sew Over It fabric e-mail, it caught my eye straightaway. I won a Sew Over It voucher wearing my monstera blouse, so why not use it to make another?

The prizewinning picture

This is the fabric. I bought 1.5m, which cost just over the £25 my prize voucher covered.

This project initially got hijacked by another sleeveless top project. This provides yet more evidence that I need to start projects very soon after buying the materials, otherwise I risk losing motivation.

I was a little torn between making another version with sleeves or a breezy sleeveless top for summer. I decided to opt for sleeveless. I didn’t wear short-sleeved tops to work for a long time because I was self-conscious about my tattoo, but I’m getting over that. I think I will add buttons to the front opening- I love an excuse to find tiny cute buttons- but omit the patch pockets. I think they will interrupt the beautiful large-scale print. Also pockets like that are useless. I’m very practical when it comes to clothing, so any details like frills, ruffles and decorative pockets aren’t for me.

When I first resumed sewing, I was all about the FBAs (full bust adjustments). I made my first adjustment on one of the very first dresses I made- a Tilly and the Buttons Bettine. I was excited by the prospect of properly fitting tops. However, more recently I have felt… almost resentful of having to make them. It’s hard to say why. For some projects, it doesn’t matter, but it is pretty important in this top. The olive version (size 12) I made is a little gapey in the shoulder region, while the white version (linked above, size 10) is too tight across the chest. It is very clear that a FBA is needed and so I decided to bite the bullet.

I traced off the front pattern piece and followed this tutorial for a full bust adjustment. I made a 1″ FBA, which will give me 2″ of extra wiggle room.

I followed this tip from Karen at Did You Make That and split the bust dart since it’s over 8cm. I kind of just eyeballed the split so I hope it’s going to look nice.

One slightly odd note is that when I marked my bust apex, it was higher than the original point in the pattern- you might be able to make out two small pink ‘x’s in the image above. However, a larger bosom is more subject to the effects of gravity, so normally the bust point would be lower. This theory is borne out in the fact that the darts on my two previous TC1617s are too high.

Even though I tried remeasuring a few times, I couldn’t figure out what I was doing wrong and just moved the bust point down by an inch or two. Again it was an eyeball job.

I’m hoping to get the fabric cut out before I go on holiday. I have to decide whether to try and sort a workaround for my lack of table at home (the only thing I think would work is sewing on the bench in the garden, but I don’t have a long enough extension cord) or avail myself of the sewing café at Sew Over It one Friday afternoon. I’m currently leaning towards the latter, though I am rapidly running out of free Fridays.

I really hope this blouse turns out nicely, since I would like to make another one from this beautiful fabric I couldn’t resist buying a couple of weeks ago.

I have now unsubscribed from the Fabric Godmother mailing list. I am too weak.

Costs

Fabric: £3.50

Pattern: Third use, original cost £3.22

Notions: Around £5

Total: Under £10!

Advertisements

I finished my latest summer top in short order after my last post, which meant that I met my target to wear it in Florence.

img_3241

Fortunately the tight armholes are not too much of a problem.

However, I definitely need a full bust adjustment and possibly a back adjustment too. I see people talking about swayback adjustment quite a bit so maybe that?

For a top made in the wrong type of fabric, I’m fairly satisfied with it. I find the mandarin collar a little constricting around my throat, but I can’t really see myself wearing this buttoned all the way up so that shouldn’t be too much of a problem.

This picture was taken on the way to my first commentary spot at the 2018 quidditch world cup. Calling and analysing the matches was a lot of fun, and it was nice to realise how much my understanding of the game has increased in the past two years.

Details

Pattern: Threadcount 1617 view B size 10

Fabric: 1.5m cotton lawn from Sew Over It

Fabric: £19.50

Notions: Around £8

Pattern: £3.22 (second use)

Total cost: Around £27.50


Another upcoming holiday, another garment made up in the preceding week. I spent around 15 straight hours working on my second version of the Threadcount 1617 blouse in this cute cotton print.

I was a victim of the Sew Over It new fabrics newsletter once again! I really must unsubscribe. I actually fell in love with a different fabric in the newsletter and make the hour-long pilgrimage to the new Islington store. Once there, I realised that the fabric wasn’t quite perfect, but I felt that this one was.

Even though I was very proud of myself for managing to make my first version of this top (on a technical level), the finished garment has issues. It feels a little too big in the shoulders and the forward shoulder seams have a very annoying habit of slipping back. But I don’t have another pattern for a sleeveless blouse so I forged ahead. Pattern recommendations will be very gratefully received.

I made few changes to the pattern as written. I took a lot of time over attempting to pattern match. I used the burrito method for the first time and it worked really well.

I decided to size down for the present project, which in hindsight was an error.

Notes:

  • Armholes are a little tight
  • If  I make this pattern again, I must use an FBA
  • Mashed up hemline shortened by 10cm

This project is a helpful reminder about the dangers of cotton. I’ve been very good about avoiding cotton but got sucked in by a lovely print. While I like the print, this fabric really is not ideal for this project because it lacks drape. I’m glad to have received this reminder because I very nearly purchased a dress-quantity of another cotton and I’m glad that I held off. I am pretty fussy about drape.

Update: I remain a sucker. Went in to Liberty to choose buttons for this top and accidentally bought 1.5m of cotton lawn in the sale.

Since it’s so hot in London, I’ve realised that my wardrobe has a complete dearth of summer tops. Liberty tana lawn is so gorgeous against the skin and has a little drape because it’s so fine. I’m still not totally sold on TC1617 so I’m going to try making a sleeveless version of the Sew Over It ultimate shirt. Wish me luck!

Details

Pattern: Threadcount 1617 view B size 10

Fabric: 1.5m cotton lawn from Sew Over It

Fabric: £19.50

Notions: Around £8

Pattern: £3.22 (second use)


I’m so pleased with how my Threadcount 1617 shirt turned out! When I look at it, I can hardly believe I was capable of making it myself. This project is a surprise win. I wouldn’t have chosen this fabric if it hadn’t been on sale, but it’s fun to experiment with a colour and pattern slightly outside my comfort zone.

There are a lot of lovely finishing details in this shirt. Plenty of slip-stitching of facings to hide seams. Overall I am very happy with the finish even though I made quite a few mistakes. I tried not to be too perfectionistic about tiny details, but rather treat the process as a learning experience for my next make.

I have mostly used indie patterns up until now. There is a lot of hand-holding and the techniques have been quite simple. It was nice to take on a more complex pattern. The sparse instructions gave me a sense of being trusted to know how to interpret them. Making the collar was the part I found the most challenging. You have to press the curved seam allowance, which is incredibly fiddly. I then managed to sew the collar on backwards!

I was glad to have done the Ultimate Shirt class at Sew Over It because I was a bit more familiar with the couture techniques that were just casually mentioned in the instructions. I had to think quite hard at times to figure out what I was supposed to be doing. I found the process very engaging and twice looked at the clock to realise I had been sewing for several hours without noticing the passage of time.

I harvested these buttons from a RTW shirt that was worn out. Something so nice about making clothes is personalising to your unique body. The old shirt had such narrow cuffs that it was impossible for me to get them over my hands with the buttons done up. This made me feel like a huge-handed freak. I tested that the cuffs fit over my hands comfortably before placing the buttonholes and buttons.

I LOVE the button tab detail. So worth the extra effort.

I can’t wait to make my summery version of this shirt, though I think that will have to wait until after I have moved house. Something I will definitely need to consider is how to finish the seams. Even though I have become quite a fan of French seams , they weren’t suitable in many places. I didn’t realise until too late due to my bad habit of not reading through all of the instructions before starting out. It will probably make most sense to keep it simple and either use an overlocker or overcasting foot.

I think I will stick with the Size 12 next time. The fit is decent in the shoulders and I like the roominess for a breezy summer shirt. It’s also SO NICE to have a blouse that is the correct length and doesn’t pool around my hips.

Firsts

  • making a two-piece sleeve. The fit is great!
  • making a curved hem that looks ok. I found this tutorial helpful. The secret seems to be just pressing it to death.

Changes not mentioned in last post

  • shortened by 6cm
  • added four press studs to fasten

Pattern: Threadcount 1617 View C size 12

Fabric: 169cm viscose remnant (140cm wide)

I think 1.5m of fabric would be sufficient for this size and view

Costs

Fabric: £10.89 (including delivery)

Pattern: £3.22

Notions: Around £5

Total: About £19


I’ve been working on sewing my first version of the Threadcount 1617 shirt. I bought the olive fabric on a whim from a Cotton Reel Studio remnant sale at least a year ago, knowing it would probably be used for a wearable toile. Once I got it, I had the idea that it would make a cute garment with a mandarin collar. When I spotted someone’s version of Threadcount 1617 on Insta, I saved it and then promptly forgot the whole thing for several months.

While going through my saved images recently, I remembered the shirt. A cursory google revealed that someone was selling it on eBay and it arrived as a birthday present to myself.

I have a gap in my wardrobe for smart-casual tops. I basically have striped long-sleeved t-shirts, denim shirts and fancy collared blouses. Nothing that would look smart-ish with jeans for work. As my body and tastes change with time, I increasingly like the way I look in tops that fit in the shoulders and bust but are relaxed around the midsection.

I love the fit of this shirt. It would have looked frumpy on me as a chubby twenty-something (which I still am in my head) but it looks chic on my more mature, slimmer frame.

My space print top measures around 41″ in the bust. I decided to cut a size 12 in the hope that any extra ease would prevent the buttons from gaping. Since this is a relaxed fit shirt in a drapey fabric, I don’t think a little extra room will matter too much.

This pattern has a really good layout for cutting (a lot less wasteful than other patterns I have used), which was a little bit of a concern since my fabric was 140cm wide rather than 150cm. However, I had plenty of fabric. The pattern has LOADS of markings to transfer, which I found extremely tiresome. However, it is worth doing.

There were also quite a few pieces to cut out of interfacing. As you can probably tell, I initially intended to trace this pattern but there were way too many fiddly pieces so I gave up.

The construction of the shirt is a little more tricky than any other written patterns I have attempted independently. Making the front opening was a head-scratcher for me! I think it looks okay overall, even though the bottom edge is a bit wonky and I think it is likely that holes will form in the corners.

Notes:

  • Carefully check tension for sewing a single layer of drapey fabric (reinforcing the neckline)
  • Be very careful when reinforcing- mark before doing. This will have a significant effect on the final look
  • Use fray check in corners
  • Because the fabric frays so much, I used French seams on the side and sleeve seams. DO NOT use a French seam on the first sleeve seam above the opening. Also be mindful of this issue on the bottom hem
  • My machine seems to handle viscose better with a regular foot than a walking foot
  • If making view C again, shorten by 4″

Overall I am pleased that I decided to make a wearable toile of this top. It has a lot of details I was doing for the first time. It would have been stressful to make using fabric I cared about more. I already have the supplies to make a second version. I quite enjoyed the trickier construction and am surprised to find myself looking forward to doing it all again.

Pattern: Threadcount 1617 View C size 12

Fabric: 169cm viscose remnant (140cm wide)

Costs

Fabric: £10.89 (including delivery)

Pattern: £3.22

Notions: Around £5

Total: About £19


I’ve got to admit that after my final class, I was worried that I would never finish sewing my Ultimate Shirt. The remaining tasks seemed very daunting for me to tackle on my own. But I went for it, and I’m glad I did!

Here’s how the shirt looks with my specially made tulip skirt. I re-did the hem, which I put off for months because I knew how dull it would be. I was right, it was boring and took two hours, but it looks much better. Having a steam iron (thanks dad!) also makes a big difference, although looking at these pics makes me realise it STILL needs more pressing.

 

I think this shirt is really only wearable tucked in, but shirt tucked into skirt worn on the waist is a look I rock at work a lot, so that’s fine.

Notes on steps taken after third class

Hand-stitching the cuff facing seemed okay as I had already used the same technique on the collar stand. Emboldened by my success, I attached the second cuff.

I next spent about an hour pressing and pinning the hem. Like my unicorn top, the hem looks shit in places, but I don’t want to redo it so I think this is something I will live with for now. I will mostly be wearing this shirt tucked in anyway. Looks like I have found my sewing nemesis- shaped hems.

The next step was scary. Buttonholes. I spent ages thinking about which colour thread to use, which turned out to be a bit of a waste of time. I don’t think I’ve ever machine sewn a buttonhole before because my mum lost the foot for her machine years ago.

I did something I normally never do- consulted the handbook of my machine for advice. I then used some scrap fabric to practice, and the resulting holes looked pretty good.

It was time. I tried on the shirt to ensure that a button would cover the fullest part of my bust, to reduce the risk of gaping. I then measured and marked each buttonhole, which worked out at every 7cm.

I did manage to make one really stupid mistake. I accidentally started one of the buttonholes on the ‘top’ mark instead of the ‘bottom’, meaning that it was about 2cm out. Next time I mark buttonholes, I will use different colours for the top and bottom marks to avoid this happening again.

Since my buttons are fluorescent pink, I knew this error would be very obvious. It was time to do something I had never wanted to do on such a light cotton voile. Unpicking. I practiced unpicking one of my practice buttonholes and managed not to break any of the threads in the fabric. Heart in mouth, I unpicked the errant hole on my blouse. I won’t keep you in suspense, dear reader. I survived, and I don’t think my silly mistake is too noticeable.

I’ve got to say, I absolutely love this outfit! Go me. I’m hoping to engage with Me Made May a lot more this year, and I think this outfit will be a key player.


I’m a bit sad to say there’s still a lot of work to do on my ultimate shirt after a couple of hours of homework plus my final three hour class at Sew Over It.


I’m happy with how the hand-stitching inside my collar turned out so I’m going to do the same on the cuffs. It’s painstaking work.

As well as attaching one cuff and finishing both, I have all of my buttons to do (having not sewn a buttonhole in years, if ever) plus the hem, which I’m very worried about. I failed twice at hemming my turquoise shirt and I still haven’t finished it.

I know I need to put the time in on this project soon, otherwise it will just languish half made in my pile of unfinished things. However, with the schools starting back next week and a few things on the cards, I’m not sure when I’ll be able to put in the hard graft in front of the sewing machine.